100% Accurate Answers! Feb-2023 AD01 Actual Real Exam Questions
Best Value Available! 2023 Realistic Verified Free AD01 Exam Questions
Difficulty in writing AD01 Exam
Blue Prism Accredited Developer certification is a most privileged achievement one could be graced with. But contrary to common views and opinions certifying with Blue Prism is not that difficult. If the candidates have proper preparation material to pass the AD01 exam with good grades. Certification questions contain the most exceptional questions answers and clarifications which cover the entire course content. Certification questions have a brilliant Blue Prism AD01 exam dumps with most recent and important questions and answers in PDF files. DumpExam is sure about the exactness and legitimacy of Blue Prism AD01 exam dumps and in this manner. Candidates can easily pass Blue Prism AD01 exam with genuine AD01 exam dumps and get Blue Prism certification skillful surely. These exam dumps are viewed as the best source to understand the Blue Prism Accredited Developer well by simply perusing these example questions and answers. If candidate complete practice the exam with certification AD01 exam dumps along with self-assessment to get the proper idea on Blue prism accreditation questions and answers for successful completion of the certification exam. Then he can pass the exam with good grades easily.
NEW QUESTION 51
Which of the following indicates a case in a Work Queue is waiting to be worked?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION 52
The Work Queue "Customer Onboarding" has a number of Pending Items which may be tagged as
"Domestic", "Retail" or "Business".
What is the correct configuration to get the next item from the queue that is tagged either "Retail" or
"Business"?
- A. Configure "Retail;Business" in the Tag Filter parameter
- B. Configure "Retail+Business' in the Tag Filter parameter
- C. Configure "-Domestic" in the Tag Filter parameter
- D. Configure "Retail or Business" in the Tag Filter parameter
Answer: D
NEW QUESTION 53
The Work Queue 'Account Closure has a number of Pending Items which may be tagged as "Current",
"Saving" or "Loan" What is the correct configuration to get the next item from the queue that is tagged either
"Current" or "Loan"?
- A. Configure "-Saving" in the Tag Filter parameter
- B. Configure "Current; Loan: in the Tag Filter parameter
- C. Configure "Current or Loan" in the Tag Filter parameter
- D. Configure "Current + Loan'" in the Tag Filter parameter
Answer: A
NEW QUESTION 54
You identify an element in Application Modeller and it highlights uniquely and can be used in your object flow diagram. The next day you find that Blue Prism cannot no longer identify the same element, your object flow is giving you 'Element not found' exceptions. Which of the following statements is true?
- A. It is common for consistency issues to be found during configuration/development testing. The most likely cause is that an attribute has been selected for the element that is changeable, such as a window title with a date, or a URL The developer needs to ensure that any changeable attributes are unticked.
- B. The Blue Prism product support team should be contacted to report the issue. This signifies an inconsistency in how the Blue Prism product is working which needs to be fixed.
- C. This must be an environment issue. The Blue Prism environment must be consistent and persistent, and an element that worked one day and does not work the next day suggests the environment is changeable.
The IT team supporting the environment needs to be contacted to fix the problem. - D. This suggests that Best Practice exception handling has not been implemented in the object. A retry loop around the object stages that are using the element will probably fix the problem
Answer: A
Explanation:
Explanation
Reason: This is happening when identifying the elements in application modeler some of the details which are changing on the different environment and while identifying the elements in application modeler the developer takes the element whose values are changing and when the application run on the different path at that point of the time the process is able to expecting values eg same url, date or title but it is not at there so the process terminates. Follow the best practice for this.
NEW QUESTION 55
Study the process flow below:
The outputs for the Get Next Case are configured below:
What is the correct configuration of the Expression in the ''Case Returned '' decision stage?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 56
Study the following diagram which is an extract from a sub-page of a process being tested in Process Studio:
There are no breakpoints in the "Access Customer Account" subpage however there is an error.
What will happen if you choose to step out (SHIFT + F11) when debugging the process?
- A. The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the "Recover1" stage.
- B. The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the stage containing the error on the "Access Customer Account" page.
- C. The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the breakpoint at "Get Customer Details" stage.
- D. The process will work all stages in the "Access Customer Account" page until the error is thrown and then focus would move to the "Exception1" stage.
Answer: C
NEW QUESTION 57
Which of the following indicates a case in a Work Queue is an exception?
B)
C)
D)
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 58
How many Start Stages can a sub-page in a Process have?
- A. 0
- B. Any Number
- C. 1
- D. 2
Answer: C
Explanation:
Explanation
Explanation/Reference: https://www.rpatraining.co.in/blue-prism-interview-questions/
NEW QUESTION 59
The Work Queue 'Account Closure has a number of Pending Items which may be tagged as "Current",
"Saving" or "Loan" What is the correct configuration to get the next item from the queue that is tagged either
"Current" or "Loan"?
- A. Configure "Current; Loan: in the Tag Filter parameter
- B. Configure "Current or Loan" in the Tag Filter parameter
- C. Configure "Current + Loan'" in the Tag Filter parameter
- D. Configure "-Saving" in the Tag Filter parameter
Answer: B
NEW QUESTION 60
Consider the following flow in an object:
Which of the following statements are true?
- A. There just needs to be a wait stage after the start stage to correct this action.
- B. There should be an intelligent wait stage after the start stage and after any stage that cause the application we are interfacing with to change
- C. If during testing in object studio this flow works, no additional wait stages should be added as they will slow the interface down.
- D. There should be a wait stage after every stage in this flow (i.e. after the navigate, read, write stages.
Answer: B
Explanation:
Explanation
Intelligent wait stage should always be used after every stage and that should be minute wait to overcome the lag when the application runs and on wait should only be used when some of action interfacing the screens or any updating is going on as per the best practices pdf
NEW QUESTION 61
An action called 'Get Account details' fails with the following exception detail:
Which of the following could cause this exception?
- A. An internal error always indicates a problem with the Blue Prism product. The Blue Prism support team should be contacted for assistance.
- B. The Read Details action in the Get Account Details Business Object no longer exists but the Process is attempting to use it.
- C. The Read Details action is not connected to another stage so cannot execute.
- D. The Business Object has not been coupled to the application by either launching it or attaching to it.
Answer: D
NEW QUESTION 62
Which of the following statements about Business Objects is true?
- A. A Business Object can be exposed to Control Room
- B. Logging of individual stages is not configurable in Business Objects Reason: As the business object is only configure in the Object studio.
Rest all other reasons are failed. - C. A Business Object is configured in the Studio area of Blue Prism
- D. It is Blue Prism best practice to include business rules within Business
Answer: C
NEW QUESTION 63
A business object needs to use a Global Send Keys stage to populate the User Name field in an application entitled Workflow. The application is in focus and cursor is in the User Name field.
In order to configure the Global Send Keys, which element needs to be placed in the Element field of the stage below?
- A. Main Window
- B. Workflow
- C. Username (Edit Field)
- D. Login Window
Answer: A
Explanation:
Explanation/Reference: https://www.rpaforum.net/threads/global-send-keys-and-send-key-events.1587/
NEW QUESTION 64
When considering an element's attributes in Application Modeller which of the following statements are true?
(select all that apply)
- A. The initial selection of attributes made by Blue Prism will always be the optimum attribute set for the element
- B. The list of attributes may vary from application type to application type
- C. The attributes are provided to Blue Prism by the Target System
- D. Selected attributes are shown as ticks in the Match column of Application Modeller Reason: A) when spying the application, blueprism fetch all the elements of the target application only, blue prism doesn't provide any elements of its own.
C) Attributes are vary from application type to type. Attributes are different for windows, browsers, mainframe, java.
D) Reason is below.
Answer: B,C,D
NEW QUESTION 65
In which of these scenarios is it ok not to use a Blue Prism work queue as part of your Blue Prism solution?
- A. A Blue Prism work queue should always be used. It eliminates the risk of contention and allows you to gracefully pause the queue at any time.
- B. A Blue Prism work queue is not required if the business process interfaces with a Work List system with in- built capability to ensure multiple users cannot work the same case at the same time.
- C. A Blue Prism work queue is not required for simple linear processes that do not work multiple cases.
- D. A Blue Prism Work Queue decreases the scalability of the solution and therefore should only be used for complex scenarios such as multi-day processing.
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 66
You identify an element in Application Modeller but when you highlight or use that element Blue Prism gives you an error message saying that duplicate elements were found.
Which of the following statements is true?
- A. You will need to make the attributes you have selected dynamic. This will allow your flow to loop around, incrementing the attribute value until the correct element is found and used.
- B. A code stage interface will need to be created and used for this application, this will give you more flexibility to interact with the application elements.
- C. It is common for duplicate elements to be found based upon the attributes that are ticked by default using the Blue Prism product. Time needs to be spent experimenting with the attribute ticks until a unique, reliable, and consistent selection of attributes are found.
- D. It will not be possible to interface with the element in a unique way. You will need to use Surface Automation techniques for this element.
Answer: A
NEW QUESTION 67
......
Actual Questions Answers Pass With Real AD01 Exam Dumps: https://braindumps2go.dumpexam.com/AD01-valid-torrent.html
