[Feb 26, 2022] Free DCS-IE DES-4122 Exam Question
DES-4122 dumps & DCS-IE sure practice dumps
The benefit of obtaining the Dell DES-4122: Specialist - Implementation Engineer, PowerEdge Exam Certification
- In process of preparing for DES-4122 exam test aspirants attain knowledge of DELL EMC PowerEdge MX server product's installation, configuration and management, with the help of DEE-4122 exam dumps and DES-4122 practice exams which helps professionals to standout with their skill set.
- Professionals having DES-4122 accreditation find themselves more competitive and confident in the job market.
How to Prepare For Dell DES-4122: Specialist - Implementation Engineer, PowerEdge Exam
Preparation Guide for Dell DES-4122: Specialist - Implementation Engineer, PowerEdge Exam
Introduction
Dell's DES-4122 Specialist-Implementation Engineer PowerEdge MX Modular certification validates that the professional is knowledgeable about DELL products such as:
- PowerEdge MX Platform Server Components
- PowerEdge MX Platform Networking Components The Dell's DES-4122 exam is a qualifying exam for the Specialist - Implementation Engineer, PowerEdge MX Modular track. Certification demonstrates the knowledge and abilities of the experts in those fields that they choose to practise. If the applicant wants to work on network routing, networking design and topologies, access control design and evidence, then Dell qualification is given, DES-4122. This Dell specialist - PowerEdge MX Modular Certificate Implementation Engineer supports an applicant in the validation of his expertise in Dell Modular Technology. In this guide, we will cover the DES-4122 exam dumps topics, Dell Specialist - Implementation Engineer PowerEdge MX Modular Certified professional's salary and all aspects of the DES-4122 practice exams Certification.
- OpenManage Enterprise Modular (OME-E)
NEW QUESTION 18
What is a key feature introduced in OpenManage Mobile v2.0?
- A. Access servers remotely through OME
- B. Access a Virtual Console (VNC over SSH) securely
- C. Access SupportAssist reports
- D. Access iDRAC remotely
Answer: C
NEW QUESTION 19
A technician is sent on-site to troubleshoot a server that produced an error message during the most recent POST, but then completed the POST and booted to the operating system. The user cannot remember the specific error and no entry was made in the error log relating to this error.
How can the technician find out what the error message was?
- A. Access the Lifecycle Controller and view the last boot cycle video capture entry
- B. Reload the BIOS firmware
- C. Export the Server profile and analyze for any POST errors
- D. Access the iDRAC and view the last boot cycle video capture entry
Answer: A
NEW QUESTION 20
What is the correct order of steps taken during the BIOS/UEFI Recovery process?
Answer:
Explanation:
NEW QUESTION 21
What is required for iDRAC Direct 2.0 to connect with IDRAC9 interfaces such as RACADM and WSMAN?
- A. Wi-Fi connection
- B. NFC connection
- C. Micro-AB USB
- D. Ethernet cable
Answer: C
NEW QUESTION 22
What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?
- A. All GPU cards must be of the same type but can be a different model
- B. All GPU cards must be of the same type and model
- C. All GPU cards must be installed on the same riser card.
- D. All GPU cards must be installed at the same time
Answer: D
NEW QUESTION 23
A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016 They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned How should the technician obtain access to the remaining 2 TB (approximately) of storage?
- A. Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again
- B. Upgrade to a newer version of the operating system
- C. Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than 2048 GB
- D. Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this server
Answer: B
NEW QUESTION 24
What is a key distinction between 1DRAC8 and 1DRAC9?
- A. iDRAC9 default credentials are root/calvin orderable only
- B. iDRAC8 default credentials are customer orderable
- C. iDRAC9 offers HTML5 based GUI
- D. iDRAC8 offers HTML5 based GUI
Answer: D
NEW QUESTION 25
What must be done before upgrading OMSA from the 32-bit to the 64-bit version?
- A. Back up the configuration
- B. Uninstall the earlier version
- C. Disable UAC
- D. Save the license file
Answer: D
NEW QUESTION 26
For a temporary migration task the CPU core count on the Dell EMC PowerEdge R640 server needs to be reduced to 8 because the installed application will not work due to license restrictions. Use the simulator to apply the change so the application can be installed.
When you have finished using the simulator, click Next.
Answer:
Explanation:
Send us your suggestion for this simulation task.
NEW QUESTION 27
What happened on April 30, 2019?
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 28
What is required to use the iSM Automatic System Recovery feature?
- A. OS watchdog timer enabled
- B. OS watchdog timer disabled
- C. Server Administrator installed
- D. Server Administrator not installed
Answer: B
NEW QUESTION 29
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system. What Is the cause of this Issue?
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Operating system not installed on remote server
- B. The Virtual Console is disabled
- C. The server has been powered down
- D. There are more than the maximum number of active sessions
Answer: C
NEW QUESTION 30
You must configure a BOSS card with 2 x 120GB drives for a Dell EMC PowerEdge server. What is the only supported mode?
- A. RAID 5
- B. Non-RAID Mirroring
- C. RAID 0
- D. RAID 1
Answer: C
NEW QUESTION 31
What is the minimum number of components, beside the system board, required to POST?
- A. 1 PSU, 1 CPU, 1 DIMM, and PERC SAS controller
- B. 1 PSU and 1 CPU only
- C. PSUs, CPUs, and DIMMs as configured in BIOS
- D. 1 PSU, 1 DIMM, and 1 CPU only
Answer: D
NEW QUESTION 32
How can the ePSA be accessed?
- A. iDRAC
- B. OMSA
- C. Lifecycle Controller
- D. VMware vSphere plug-in
Answer: A
NEW QUESTION 33
Which rear disk drive option is available in a Dell EMC PowerEdge R740xd server?
- A. 6x2 5" drives
- B. 2x3.5" drives
- C. 8x2 5" drives
- D. 4x 3.5" drives
Answer: B
NEW QUESTION 34
A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?
- A. The LCC can be rolled back; the iDRAC cannot be rolled back
- B. The iDRAC can be rolled back; the LCC cannot be rolled back
- C. Both the iDRAC and the LCC can be rolled back
- D. The iDRAC cannot be rolled back and the LCC cannot be rolled back
Answer: A
NEW QUESTION 35
Which processor configuration is used by the Dell EMC PowerEdge R740 server?
- A. 2 socket AMD
- B. 4 socket Intel
- C. 4 socket AMD
- D. 2 socket Intel
Answer: D
NEW QUESTION 36
......
EMC DES-4122 Actual Questions and Braindumps: https://braindumps2go.dumpexam.com/DES-4122-valid-torrent.html
