Free 1z0-1054-23 Exam Braindumps certification guide Q&A
1z0-1054-23 Certification Overview Latest 1z0-1054-23 PDF Dumps
NEW QUESTION # 17
Your ledger currency is USD. At month end you have a balance on the Accounts Payable Liability Account of
100,000 Euros which is equivalent to USD 136,550. This balance needs to be revalued.
The month end exchange rate for revaluation is 1 Euro = 1.3755 USD.
What two statements are true for the resulting revaluation run? (Choose two.)
- A. The original journal entry in Euros remains the same.
- B. There is no unrealized exchange gain or loss calculated.
- C. The original journal entry in Euros is updated.
- D. You have an unrealized exchange loss recorded.
- E. You have an unrealized exchange gain recorded.
Answer: D,E
Explanation:
Explanation
The two true statements for the resulting revaluation run are that you have an unrealized exchange gain recorded and you have an unrealized exchange loss recorded. Revaluation is a process that adjusts foreign currency balances to reflect current exchange rates at period end. Revaluation creates journal entries to record unrealized exchange gains or losses on foreign currency balances based on revaluation rates defined for each currency. In this scenario, you have a balance on the Accounts Payable Liability Account of 100,000 Euros which is equivalent to USD 136,550 at month end. The month end exchange rate for revaluation is 1 Euro =
1.3755USD. Therefore, after revaluation, your balance on the Accounts Payable Liability Account will be USD 137,550 (100,000 x 1.3755). This means you have an unrealized exchange gain of USD 1,000 (137,550 -
136,550) on your Accounts Payable Liability Account because your liability in foreign currency has decreased in terms of your ledger currency due to exchange rate fluctuations. Revaluation will create a journal entry to debit your Accounts Payable Liability Account by USD 1,000 and credit your Unrealized Exchange Gain Account by USD 1,000 to record this gain. The original journal entry in Euros is not updated by revaluation, as revaluation only creates new journal entries to adjust foreign currency balances in terms of ledger currency based on revaluation rates. There is no unrealized exchange gain or loss calculated by revaluation, as revaluation does calculate unrealized exchange gains or losses on foreign currency balances based on revaluation rates.
NEW QUESTION # 18
Your customer has a number of Chart of Account Mapping Rules for their Primary and Secondary ledgers.
You decide to use the FBDI template to load the rules.
Which two statements are true when using this method of entry? (Choose two.)
- A. You can create, update, and delete segment rules for a chart of accounts mapping.
- B. You can create, update, and delete account rules for a chart of accounts mapping.
- C. You can download the template only from the Manage Chart of Accounts Mappings page.
- D. It supports external integration using REST services.
Answer: A,B
Explanation:
Explanation
According to Oracle documentation3, when using FBDI template to load Chart of Account Mapping Rules for their Primary and Secondary ledgers, you can create, update, and delete account rules for a chart of accounts mapping, and you can create, update, and delete segment rules for a chart of accounts mapping. FBDI enables you to import chart of accounts mapping rules from a spreadsheet template into General Ledger. You can use FBDI to manage both account rules and segment rules for a chart of accounts mapping. Therefore, options C and Dare correct. Option A is incorrect because you can download the template from other pages besides the Manage Chart of Accounts Mappings page. Option B is incorrect because FBDI does not support external integration using REST services.
NEW QUESTION # 19
Which two are valid Data Access Set types? (Choose two.)
- A. Read and Write access
- B. Full access
- C. Full Ledger
- D. Read Only access
- E. Primary Balancing Segment Value
Answer: B,D
Explanation:
Explanation
The two valid Data Access Set types are Full access and Read Only access. A Data Access Set is a security feature that defines the access level that users have to ledger data, such as balances, budgets, or journals. A Data Access Set type is an attribute that determines the type of access that users have to ledger data within a Data Access Set. The two valid Data Access Set types are Full access and Read Only access. Full access allows users to view and enter data for ledger data within a Data Access Set. Read Only access allows users to view but not enter data for ledger data within a Data Access Set. Full Ledger is not a valid Data Access Set type, but an option that determines whether a Data Access Set grants access to all balancing segment values in a ledger or only specific balancing segment values. Primary Balancing Segment Value is not a valid Data Access Set type, but an attribute that identifies the legal entity or business unit for which financial statements are prepared and balanced. Read and Write access is not a valid Data Access Set type, but an alternative term for Full access. Reference: Oracle Financials Cloud: General Ledger 2022 Implementation Professional Objectives - Define Ledgers 12
NEW QUESTION # 20
Which delivered role can access the full functionality of Functional Setup Manager?
- A. Functional Setup Manager Superuser
- B. IT Security Manager
- C. Application Implementation Manager
- D. Application Implementation Consultant
- E. Any functional user
Answer: C
Explanation:
Explanation
According to Oracle documentation2, the delivered role that can access the full functionality of Functional Setup Manager is Application Implementation Manager. Functional Setup Manager is a tool that enables you to manage and perform all of the setup tasks required for an application implementation. Application Implementation Manager is a predefined role that grants access to Functional Setup Manager and all of its features, such as setup tasks, implementation projects, setup export and import, and setup reports. Therefore, option A is correct. Option B is incorrect because Functional Setup Manager Superuser is not a delivered role.
Option C is incorrect because IT Security Manager is a role that grants access to security-related tasks, not Functional Setup Manager. Option D is incorrect because any functional user does not have access to Functional Setup Manager by default. Option E is incorrect because Application Implementation Consultant is not a delivered role.
NEW QUESTION # 21
You are setting up Close Monitor and want to view high-level profit and loss results for each ledger.
What should you associate with the ledger set to achieve this?
- A. Financial Reporting Web Studio report
- B. OTBI report
- C. Trial Balance report
- D. Account group
Answer: A
Explanation:
Explanation
To view high-level profit and loss results for each ledger in the Close Monitor, you need to associate a Financial Reporting Web Studio report with the ledger set. This report should be based on the General Ledger Balances cube and should include the Income Statement account group as a row dimension. The report should also have the ledger set as a point of view dimension and the period and currency as user prompts. This way, you can select the ledger set, period, and currency when you run the report from the Close Monitor and see the aggregated income statement results for each ledger and consolidation node in the ledger set hierarchy. References: Overview of Close Monitor, Using General Ledger, Close Monitor Issue
NEW QUESTION # 22
You are using the Create Budgets in a Spreadsheet option to load your budget balances into the General Ledger balances cube. Your FYXX Budget is not appearing in the Budget Name list of values.
What are two reasons for this?
- A. Publish Chart of Accounts Dimension Members and Hierarchies to the Balances Cube has not been run.
- B. Transfer Budget Balances to Budget Cubes has not been run.
- C. Budgeting is not enabled in the Ledger options.
- D. The Create Scenario Dimension Members program has not been run.
- E. A value for the budget scenario is not created.
Answer: D,E
Explanation:
Explanation
To use the Create Budgets in a Spreadsheet option, you need to have a budget scenario value and a scenario dimension member for your budget. A budget scenario value is a user-defined value that identifies a budget, such as FYXX Budget. A scenario dimension member is a member of the scenario dimension in the General Ledger balances cube that corresponds to a budget scenario value, such as FYXX_Budget. You can create budget scenario values and scenario dimension members using the Manage Budget Scenario Values task or the Create Scenario Dimension Members program. If you do not create these values and members, your budget will not appear in the Budget Name list of values in the spreadsheet. Therefore, the two reasons for your issue are:
A value for the budget scenario is not created: You need to create a budget scenario value for your budget using the Manage Budget Scenario Values task. This task enables you to define and maintain budget scenario values and their attributes, such as description, start date, end date, and status. You can also specify whether the budget scenario value is enabled for budgeting and reporting. You need to enable the budget scenario value for budgeting to use it in the spreadsheet.
The Create Scenario Dimension Members program has not been run: You need to run the Create Scenario Dimension Members program to create scenario dimension members for your budget scenario values. This program automatically creates scenario dimension members for all budget scenario values that are enabled for budgeting and do not have existing scenario dimension members. You can run this program manually or schedule it to run periodically. You need to run this program after you create or update budget scenario values to ensure that they are reflected in the scenario dimension.
References:
Create Budgets in a Spreadsheet
Manage Budget Scenario Values
Create Scenario Dimension Members
NEW QUESTION # 23
The Cloud Client wants to add a global branding logo and more predefined transactional attributes to the journal approval email notification.
Which two Business Intelligence catalog objects should you copy (or customize) and edit? (Choose two.)
- A. The layout-Template
- B. The Data Source
- C. Output type
- D. The Data Model
- E. The Sub_Template
Answer: A,D
NEW QUESTION # 24
What are two uses of the Column Flattening and Row Flattening features? (Choose two.)
- A. Set the status of a tree to active.
- B. Verify correctness of trees.
- C. Create additional versions of a tree.
- D. Optimize parent/child relationships.
- E. View information for runtime performance.
Answer: A,B
Explanation:
Explanation
The two uses of the Column Flattening and Row Flattening features are to set the status of a tree to active and to verify correctness of trees. Column Flattening and Row Flattening are features that optimize parent-child information for run-time performance by storing additional rows or columns in a table for instantly finding all descendants or ancestors of a node without initiating a recursive query. Column Flattening and Row Flattening are required to set the status of a tree to active, as they ensure that the tree data is consistent and accurate.
Column Flattening and Row Flattening are also useful to verify correctness of trees, as they allow users to view and analyze the flattened hierarchy data using various tools such as Oracle Analytics Publisher or Oracle Transactional Business Intelligence. You do not use Column Flattening and Row Flattening to create additional versions of a tree, as this is a feature that allows users to copy an existing tree version and make changes to it without affecting the original version. Youdo not use Column Flattening and Row Flattening to view information for runtime performance, as this is a feature that allows users to monitor and measure the performance of various processes or tasks in Oracle Fusion Applications. You do not use Column Flattening and Row Flattening to optimize parent/child relationships, as this is a feature that allows users to define rules and constraints for how nodes can be related to each other in a tree structure. Reference: Oracle Financials Cloud: General Ledger 2022 Implementation Professional Objectives - Define Chart of Accounts 12
NEW QUESTION # 25
Your company has complex consolidation requirements with multiple General Ledger instances. You are using Oracle Hyperion Financial Management to consolidate the disparate General Ledgers. You can typically map segments between your General Ledger segment to a Hyperion Financial Management segment, such as Company to Entity, Department to Department, and Account to Account What happens to segments in your source General Ledger, such as Program, that cannot be mapped to Hyperion Financial Management?
- A. No data is transferred.
- B. Data is summarized across segments that are not mapped to Hyperion Financial Management.
- C. Errors occur for unmapped segments. You must map multiple segments from source General Ledgers to the target segment in Hyperion Financial Management.
- D. The unmapped segments default to future use segments in Hyperion Financial Management.
Answer: B
Explanation:
Explanation
When integrating with Oracle Hyperion Financial Management, you can use the following dimensions for consolidation: Entity, Scenario, Year, Period, Value, Account, Intercompany, Custom1 to Custom4, and View.
You can map one to one, or concatenatesegments from your source General Ledger to a single Hyperion Financial Management dimension. For example, you can map Company to Entity, Department to Department, and Account to Account. However, if you have segments in your source General Ledger that cannot be mapped to any Hyperion Financial Management dimension, such as Program, then the data is summarized across those segments. This means that the data is aggregated to the highest level of the unmapped segments, and the detail information is lost. For example, if you have Program as a segment in your source General Ledger, and you do not map it to any Hyperion Financial Management dimension, then the data is summarized by Program, and you cannot see the data by individual Program values in Hyperion Financial Management.
References:
Example of Mapping Segments to Financial Management Dimensions
Overview of the Chart of Accounts Mapping Page
NEW QUESTION # 26
Your customer uses Financials Cloud, Projects, Inventory, and SCM.
Which two statements are true regarding intercompany accounting for these products? (Choose two.)
- A. Intercompany balancing rules in General Ledger need to be mapped with the intercompany configuration in each product.
- B. Intercompany Balancing Rules are defined centrally and applied across Financials and Projects.
- C. Each product has its own Intercompany Accounting feature that needs to be configured separately.
- D. In Financials Cloud, Intercompany Balancing Rules are used to balance both cross-ledger allocation journals and single-ledger journals.
Answer: B,C
Explanation:
Explanation
According to Oracle documentation1, the following statements are true regarding intercompany accounting for Financials Cloud, Projects, Inventory, and SCM: Each product has its own Intercompany Accounting feature that needs to be configured separately, and Intercompany Balancing Rules are defined centrally and applied across Financials and Projects. Intercompany accounting is the process of recording transactions between related entities within an enterprise or between groups in the same legal entity. Each product has its own Intercompany Accounting feature that enables you to create, process, and reconcile intercompany transactions.
Intercompany Balancing Rules are used to generate balancing entries for journals that are out of balance by legal entity or primary balancing segment values. Intercompany Balancing Rules are defined in General Ledger and applied across Financials and Projects. Therefore, options A and C are correct. Option B is incorrect because Intercompany Balancing Rules are not used to balance cross-ledger allocation journals.
Option D is incorrect because Intercompany balancing rules in General Ledger do not need to be mapped with the intercompany configuration in each product.
NEW QUESTION # 27
A new Oracle Fusion Cloud client needs to produce an income statement on a regular basis using Smart View.
Which Smart View tool would be best for this?
- A. Smart Slices
- B. Smart Queries
- C. Account Groups
- D. Query Designer
Answer: D
Explanation:
Explanation
Query Designer is a Smart View tool that enables you to create and modify ad hoc queries on General Ledger balances cubes. You can use Query Designer to select the dimensions, members, and filters that you want to include in your query, and then retrieve the data in a grid format in Excel. You can also save, open, and refresh your queries as needed. Query Designer is the best tool for producing an income statement on a regular basis using Smart View, because it allows you to easily access and analyze the income and expense accounts, as well as the ledger, period, currency, and other dimensions that are relevant for your report. You can also customize the layout and format of your grid, and use Excel functions and features to enhance your report.
References:
Overview of Smart View
Creating an Ad Hoc Analysis in Smart View
NEW QUESTION # 28
You have a requirement to have invoices generated for certain Intercompany transactions.
Where do you enable invoicing?
- A. the transaction category
- B. the transaction batch
- C. the transaction source
- D. the transaction type
Answer: D
Explanation:
Explanation
According to Oracle documentation2, you enable invoicing for certain Intercompany transactions on the transaction type. The transaction type defines the characteristics of an intercompany transaction, such as whether it requires approval, whether it generates invoices, and what accounting rules apply. You can enable invoicing for a transaction type by selecting the Invoicing Options tab and choosing the invoice method, invoice source, invoice batch source, and invoice rule. Therefore, option D is correct. Option A is incorrect because you do not enable invoicing on the transaction batch. Option B is incorrect because you do not enable invoicing on the transaction category. Option C is incorrect because you do not enable invoicing on the transaction source.
NEW QUESTION # 29
Which three factors should you consider while specifying Intercompany System options?
- A. Automatic or manual batch numbering and the maximum transaction amount
- B. Approvers who will approve intercompany transactions
- C. Automatic or manual batch numbering and the minimum transaction amount
- D. Whether to allow receivers to reject intercompany transactions
- E. Whether to enforce an enterprise-wide currency or allow intercompany transactions in local currencies
Answer: C,D,E
Explanation:
Explanation
Intercompany System options are used to set up intercompany processing rules at the enterprise level, based on your specific business needs. They help you standardize and simplify transaction processing, minimize disputes, and reduce administrative costs. The three factors that you should consider while specifying Intercompany System options are:
Automatic or manual batch numbering and the minimum transaction amount: These options help you control the numbering and the size of intercompany transactions. You can choose to use system generated or manual batch numbering, and you can specify a minimum threshold amount for intercompany transactions to prevent immaterial transactions. To use the minimum transaction amount option, you must also select an Intercompany currency option.
Whether to enforce an enterprise-wide currency or allow intercompany transactions in local currencies:
This option helps you manage the currency risk and the conversion rate fluctuations for intercompany transactions. You can choose to standardize transaction processing by selecting an Intercompany currency, which means that all intercompany transactions created in the Intercompany module are entered in this currency. Alternatively, you can choose to allow intercompany transactions in local currencies, which means that intercompany transactions can be entered in the ledger currency of the sender or the receiver.
Whether to allow receivers to reject intercompany transactions: This option helps you handle the approval and dispute resolution process for intercompany transactions. You can choose to allow receivers to reject intercompanytransactions if they disagree with the sender's information, such as the amount, the account, or the date. If you enable this option, you must also specify the rejection reason and the notification details for the sender.
References:
Intercompany System Options
Implementing Enterprise Structures and General Ledger
Implement General Ledger
NEW QUESTION # 30
After completing a business requirement mapping session, it has been decided that only single Currency Journals will be entered for this Company.
To achieve this requirement, on which two objects should you enable "Limit a Journal to a Single Currency"?
(Choose two.)
- A. Ledger options
- B. Journal category
- C. Journal sources
- D. Journal lookup codes
- E. Profile option
Answer: A,C
Explanation:
Explanation
To achieve the requirement of only single currency journals being entered for this company, you should enable
"Limit a Journal to a Single Currency" on both ledger options and journal sources. Ledger options are settings that apply to a specific ledger, such as journal processing options, currency options, and average balance processing options. Journal sources are identifiers that indicate where a journal originated, such as manual entry, subledger accounting, or import. Youcan enable "Limit a Journal to a Single Currency" on both ledger options and journal sources using the Specify Ledger Options and Manage Journal Sources tasks in Setup and Maintenance. This will enforce single currency journals for journals entered on the Create Journal page and for journals that are imported. You do not need to enable "Limit a Journal to a Single Currency" on journal lookup codes, as these are codes that indicate the status of a journal, such as Entered, Posted, or Reversed. You do not need to enable "Limit a Journal to a Single Currency" on journal category, as this is an attribute that classifies journals by purpose or function, such as Purchase Invoices or Allocations. You do not need to enable "Limit a Journal to a Single Currency" on profile option, as this is a setting that affects the behavior of an application or feature for a user or responsibility. Reference: Oracle Financials Cloud: General Ledger 2022 Implementation Professional Objectives - Define Ledgers 12
NEW QUESTION # 31
You have just been hired to add a new subsidiary to the corporate enterprise structure in the customer's Oracle Fusion Cloud.
The subsidiary will capture transaction information from subledgers in the local currency and under International Financial Reporting standards (IFRS) and local GAAP for corporate reporting requirements, which will report via the use of a secondary ledger.
The secondary ledger is used only at period end; there is no need to have real-time transaction or Journal details. It is noted that most of the accounting between IFRS and Corporate GAAP is similar.
Which conversion level would you recommend to keep a thin secondary ledger?
- A. Balance level
- B. Sub-ledger level.
- C. Adjustment only
- D. Journal ledger
Answer: A
Explanation:
Explanation
To keep a thin secondary ledger, you should select the balance level as the data conversion level. This means that only the ending balances of the primary ledger are copied to the secondary ledger at the end of each period. This reduces the data volume and storage requirements of the secondary ledger, as well as the processing time and resources needed to copy the data. The balance level conversion is suitable for scenarios where the accounting methods or charts of accounts are similar between the primary and secondary ledgers, and there is no need to maintain detailed journals or subledger transactions in the secondary ledger. References: Primary Ledgers, Secondary Ledgers, and Reporting Currencies, How Journals Are Copied from Primary to Secondary Ledgers When ..., GL Secondary Ledger Conversion Level Change
NEW QUESTION # 32
Manage Chart of Accounts Structure and Instance
Scenario
Your client is implementing Oracle Fusion Cloud Financials. The decision is to have a 5-segment Chart of Accounts: Company, Cost Center, Account, Product, and Intercompany. You are working in the General Ledger team and will be responsible for creating the Chart of Accounts Structure and Instance for the Chart of Accounts.
Task 1
Create a Chart of Accounts Structure and Instance for the following Chart of Accounts:
Note:
Prefix all your setups with 07, where 07 is your candidate ID
There is one balancing segment.
Choose the appropriate segment labels.
. For the purpose of this test there is no need to deploy the flexfield.
. Valid code combinations should be added to the Code Combination table automatically.
Shorthand aliases will not be implemented.
. Accept the defaults for the instance segments.
Answer:
Explanation:
See the Explanation for the complete Solution.
Explanation
Here are the steps you need to follow:
Navigate to the Setup and Maintenance work area and search for the task Manage Chart of Accounts Structures.
Click on the Create icon to create a new Chart of Accounts Structure. Enter the following information:
Structure Code: 07COA
Structure Name: 07 Chart of Accounts
Description: Chart of Accounts for candidate 07
Number of Segments: 5
Click on the Next button to define the segments. Enter the following information for each segment:
Segment Number: 1
Segment Name: Company
Value Set Code: 07Corporate Company
Value Set Name: 07 Corporate Company
Maximum Size: 3
Balancing: Yes
Segment Label: Company
Segment Number: 2
Segment Name: Cost Center
Value Set Code: 07Corporate Cost Center
Value Set Name: 07 Corporate Cost Center
Maximum Size: 4
Balancing: No
Segment Label: Cost Center
Segment Number: 3
Segment Name: Account
Value Set Code: 07Corporate Account
Value Set Name: 07 Corporate Account
Maximum Size: 8
Balancing: No
Segment Label: Natural Account
Segment Number: 4
Segment Name: Product
Value Set Code: 07Corporate Product
Value Set Name: 07 Corporate Product
Maximum Size: 3
Balancing: No
Segment Label: Product
Segment Number: 5
Segment Name: Intercompany
Value Set Code: 07Corporate Company
Value Set Name: 07 Corporate Company
Maximum Size: 3
Balancing: No
Segment Label: Intercompany
Click on the Next button to review the summary and click on the Save and Close button to save the Chart of Accounts Structure.
Navigate to the Setup and Maintenance work area and search for the task Manage Chart of Accounts Structure Instances.
Click on the Create icon to create a new Chart of Accounts Structure Instance. Enter the following information:
Structure Code: 07COA
Structure Name: 07 Chart of Accounts
Description: Chart of Accounts for candidate 07
Chart of Accounts Structure: 07COA
Enabled: Yes
Allow Dynamic Inserts: Yes
Click on the Next button to review the summary and click on the Save and Close button to save the Chart of Accounts Structure Instance.
You have successfully created a Chart of Accounts Structure and Instance for the given scenario. For more information, you can refer to the following resources:
Chart of Accounts Structures and Instances
Chart of Accounts Components
Minimum Steps For Financial Enterprise Structures Configuration
Overview of Creating and Configuring Chart of Accounts Structure and Instances
NEW QUESTION # 33
......
The Best Oracle 1z0-1054-23 Study Guides and Dumps of 2024: https://braindumps2go.dumpexam.com/1z0-1054-23-valid-torrent.html
