Latest Jan 25, 2022 Real 300-815 Exam Dumps Questions Valid 300-815 Dumps PDF
Cisco 300-815 Exam Dumps - PDF Questions and Testing Engine
How to book the Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services Exam
You must take the following procedures to take part in the Cisco IP Networks (300-815) Examination:
- Step 1: Click here for the Pearson VUE website
- Step 2: Sign in or establish an account
- Step 3: enter the examination number 300-135
- Step 4: Follow on-line directions
- Step 5: Taking 300-815 practice exams
- Step 6: Pay for examination with a credit card or examination voucher
NEW QUESTION 54
When you troubleshoot H.323 call setup, which message informs you that the called party is being notified about the call?
- A. ALERTING
- B. RINGING
- C. CONNECT
- D. PROCEEDING
Answer: A
NEW QUESTION 55
Which two extended capabilities must be configured on dial peers for fast start-to-early media scenarios (H.323 to SIP interworking)? (Choose two.)
- A. BFCP
- B. AUDIO
- C. FAX
- D. DTMF
- E. VIDEO
Answer: A,D
NEW QUESTION 56
What are the elements for Device Mobility configuration?
- A. device pool, Device Mobility group, and Cisco IP phone
- B. physical location, device pool, and Device Mobility group
- C. device pool, Device Mobility group, and region
- D. physical location. Device Mobility group, and region
Answer: B
Explanation:
Reference:
https://www.ciscopress.com/articles/article.asp?p=1249228&seqNum=4
NEW QUESTION 57
Refer to the exhibit.
ILS has been configured between two hubs using this configuration. The hubs appear to register successfully, but ILS is not functioning as expected. Which configuration step is missing?
- A. A password has never been set for ILS.
- B. The Cluster IDs have not been set to unique values
- C. Use TLS Certificates must be selected.
- D. Trust certificates for ILS have not been installed on the clusters
Answer: B
NEW QUESTION 58
Refer to the exhibit.
How many maximum hops can an ILS update traverse?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 59
Refer to the exhibit.
Calls incoming from the provider are not working through newly set up Cisco Unified Border Element. Provider engineers get the 404 Not Found SIP message. Incoming calls are coming from the provider with called number "222333444" and Cisco Unified Communications Manager is expecting the called number to be delivered as "444333222". The administrator already verified that the IP address of the Cisco Unified CM is set up correctly and there are no dial peers configured other than those shown in the exhibit. Which action must the administrator take to fix the issue?
- A. Change the destination-pattern on the outgoing dial peer to match "444333222".
- B. Fix the voice translation-rule to match specifically number "222333444" and change it to "444333222".
- C. Create specific matching for "222333444" on the incoming dial peer.
- D. Set up translation-profile on the incoming dial peer to match incoming traffic.
Answer: D
NEW QUESTION 60
Refer to the exhibit.
Users report that when they dial to Cisco Unity Connection from an external network, they cannot enter any digits. Assuming only in-band DTMF is supported, what is a reason for this malfunction?
- A. There is SIP Delayed Offer. DTMF is supported only in Early Offer.
- B. The negotiated RTP port is outside of the range described by RFC, so inband DTMFs do not work.
- C. No DTMF is negotiated.
- D. The rtpmap:0 value for the negotiated codec is marking DTMF as inactive.
Answer: C
NEW QUESTION 61
Refer to the exhibit.
Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?
- A. Adjust the service parameter T204 timer to the desired value.
- B. Adjust the service parameter T302 timet to the desired value.
- C. Check the Urgent Priority check box under 9.911 pattern.
- D. Point the emergency pattern directly to the PSTN gateway.
Answer: C
NEW QUESTION 62
Refer to the exhibit.
An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco Unified Communications Manager does not complete. The administrator wants to use the Dialed Number Analyzer on Cisco Unified CM to check which translation pattern the call is matching. However, when logging in to Cisco Unified Serviceability there is no option for Dialed Number Analyzer under the tool menu. Which two steps must be performed to resolve this issue? (Choose two.)
- A. Activate the Cisco Extended Functions service.
- B. Activate the Cisco Dialed Number Analyzer Server service.
- C. Activate the Cisco CallManager service.
- D. Restart the subscriber
- E. Activate the Cisco Dialed Number Analyzer service.
Answer: B,E
NEW QUESTION 63
Refer to the exhibit.
Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as "YOW" are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user +1613-555-1234 dials the number?
- A. calling number 011613-555-1234 and numbering type "international"
- B. calling number 011-1-613-555-1234 and numbering type "subscriber"
- C. calling number 613-555-1234 and numbering type "national"
- D. calling number 613-555-1234 and numbering type "subscriber"
Answer: C
NEW QUESTION 64
An administrator is working on an issue between the customer s Cisco Unified Border Element and the service provider. The provider only wants to see mid-call signaling from the Cisco Unified Border Element for fax calls. Which command must be configured on Cisco Unified Border Element?
- A. midcall-signallng passthru
- B. midcall-signaling preserve-codec
- C. midcall-signaling passthru media-change
- D. no update-callerid
Answer: C
NEW QUESTION 65
Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)
- A. passwords
- B. TLS certificates
- C. username and secret key
- D. FQDN of the servers defined in DNS
- E. TokenID
Answer: A,B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/ sysConfig/11_5_1_SU1/cucm_b_system-configuration-guide-1151su1/cucm_b_system-configuration-guide- 1151su1_chapter_011001.pdf
NEW QUESTION 66
A user in location X dials an extension at location
Y. The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?
- A. ptime mismatch
- B. missing Call Admission Control
- C. phone class of service issue
- D. codec mismatch
Answer: D
Explanation:
Section: Cisco Unified Border Element
NEW QUESTION 67
End users at a new site report being unable to hear the remote party when calling or being called by users at headquarters. Calls to and from the PSTN work as expected. To investigate the SIP signaling to troubleshoot the problem, which field can provide a hint for troubleshooting?
- A. c= line of SDP content
- B. o= line of SDP content
- C. Allow: header if the 200 OK response
- D. Contact: header of the 200 OK response
Answer: B
Explanation:
Section: Signaling and Media Protocols
NEW QUESTION 68
For s SIP to SIP call flow, when does Cisco Unified Border Element require transcoding resources for DTMF?
- A. interworking between h245-signal and rtp-nte
- B. interworking between an OOB method and RFC2833 for flow-around calls
- C. interworking between an OOB method and RFC2833 for flow-through calls
- D. interworking between h245-alpha numeric and sip-kpml
Answer: B
NEW QUESTION 69
Refer to the exhibit.
Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized
E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?
- A. rule 1 /^\+1\([2-9]..[2-9]......$\)/ /\0/
- B. rule 1/^\+1\([2-9]..[2-9]......$\)/ /\1/
- C. rule 1 /^\([2-9]..[2-9]......$\)/ /\1/
- D. rule 1 /^/+\([^1].*\)/ /011\1/
Answer: B
NEW QUESTION 70
Which services are needed to successfully implement Cisco Extension Mobility in a standalone Cisco Unified Communications Manager server?
- A. Cisco CallManager, Cisco TFTP, and Cisco CallManager SNMP Service
- B. Cisco TAPS Service, Cisco TFTP, and Cisco Extension Mobility
- C. Cisco CallManager, Cisco TFTP, and Cisco Extension Mobility
- D. Cisco Extended Functions, Cisco Extension Mobility, and Cisco AXL Web Service
Answer: C
NEW QUESTION 71
Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)
- A. chooses the route group that is configured under the device pool of the called-party device
- B. can be assigned directly to the route pattern
- C. can be associated under the route group
- D. chooses the route group that is configured under the device pool of the calling-party device
- E. can be associated only under the route list
Answer: A,E
NEW QUESTION 72
End users at a new site report being unable to hear the remote party when calling or being called by users at headquarters. Calls to and from the PSTN work as expected. To investigate the SIP signaling to troubleshoot the problem, which field can provide a hint for troubleshooting?
- A. c= line of SDP content
- B. Allow: header if the 200 OK response
- C. Contact: header of the 200 OK response
- D. o= line of SDP content
Answer: A
NEW QUESTION 73
Refer to the exhibit.
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. answer-address 555 ........
- B. session-protocol sipv2
- C. incoming called number 555.......
- D. codec g729
Answer: B
NEW QUESTION 74 
Refer to the exhibit. In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user
C. Which two scenarios are correct? (Choose two.)
- A. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- B. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
- D. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- E. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
Answer: D,E
Explanation:
Section: Signaling and Media Protocols
NEW QUESTION 75
When the services key is pressed Cisco Extension Mobility does not show up. What is the cause of the issue?
- A. Cisco Extension Mobility is not enabled in the Phone Configuration Window (Device > Phone)
- B. The phone is not subscribed to Cisco Extension Mobility Service.
- C. Cisco Extension Mobility Service is not running.
- D. The URL configured for Cisco Extension Mobility is not correct.
Answer: B
NEW QUESTION 76
......
What Topics Does 300-815 Assess?
Earning a passing score in such a Cisco exam will require the candidate to have a thorough understanding of all the test parts that are organized in the following exam domain:
- Dial planning & call control
The fourth portion of this exam covers 25% of the content and consists of questions regarding the Cisco Unified Communications Manager. The candidate should be capable of configuring various globalized call routing components of the Cisco Unified Communications Manager. These components include translation patterns, route patterns, transformation patterns, TEHO, SIP trunking, and standard local routing group. Moreover, the candidates must be able to troubleshoot all these globalized elements for call routing.
- Cisco Unified CM Call Control Features
To get through the fifth section of the exam that takes up 20%, the applicant should know the concept of Call Admission Control and must be able to troubleshoot it. However, this doesn't include RSVP technology. This section also includes various technologies such as ILS, URI, and GDPR, and the applicant should be able to skillfully configure them. Furthermore, the entrant's knowledge of hunt groups, call queuing, and the time of day routing and their configuration will be tested under such an objective. Finally, the applicant should be capable of configuring various supplementary functions such as call park, meet-me, and call pick-up.
- Gateway technologies for CME/SRST
The second objective takes up 10% of all test questions and deals with the Cisco Unified Communications Manager Express. What is more, the entrant needs to be aware of how to configure the aforementioned technologies for SIP phone registration. In addition to that, the applicant should be capable of configuring Cisco Unified CME dial plans along with implementing the prevention of toll fraud. Furthermore, this domain tests the candidate's capability in configuring various advanced Cisco Unified CME features that include Hunt groups, Call park, and Paging. At last, under such a category, you'll get to know more about the gateway for SIP SRST and its configuration.
- The element for Cisco Unified Border
The third section of the exam includes 15% of all questions regarding the Cisco Unified Border Element technology. Thus, the entrant should be capable of configuring various Cisco Unified Border Element dial plan parts such as DTMF, voice translations rules & profiles, the list of codec preferences, dial peers, headers, and the manipulation of SDP with diverse SIP profiles. This domain also deals with troubleshooting all the aforementioned Cisco Unified Border Element dial plan components.
Official Courses for Cisco 300-815 Exam Preparation
Before taking the exam, you have to master all the above topics. The most rational way to do this is by adopting corresponding Cisco training. These are three programs you can apply for:
- Implementing and Understanding Cisco Advanced Call Control and Mobility Services (CLACCM)
During this official course, you will get solid knowledge about how to utilize CU-CM features to simplify the communications system into a modular, lightweight, and reliable collaboration approach. You will also learn about several other features, such as Globalized Call Routing, Cisco Extension Mobility, Cisco Unified Mobility, and many others. Using this course as your guide will bolster your studies for the test. The training is offered in three forms: 5 days of instructor-led classes, 5 days of virtual sessions, or a set of E-learning tools and materials equivalent to 5-day preparation.
- Understanding Cisco Collaboration Foundations (CLFNDU)
This is one more training course that would make you ready for this test. It provides you with all the information you need to know to maintain a simple Cisco Unified Communications Manager and handle the Session Initiation Protocol (SIP) gateway. It encompasses preliminary settings, the management of systems, customer management, media services management, as well as tools used for troubleshooting and maintenance of CU Communications solutions. This program also has a duration of 5 days regardless of its format, which includes the options such as instructor-led, virtual classroom, and E-learning.
- Implementing and Operating Cisco Collaboration Core Technologies (CLCOR)
If you start from the very beginning, it’s better to first enroll in training for the core test. It lets you prepare for the Cisco CCNP Collaboration from scratch, covering the most basic concepts. During it, you'll prepare for advanced-level positions based on Cisco collaboration technologies deployment and service. You will also acquire the expertise and skills one needs to have to install and deploy common collaboration and networking technologies. Also, it is focused on the areas like configuration, call management, service quality, and other Cisco collaboration applications. It can be followed as 8-day sessions guided by an instructor, 8-day virtual training, or E-learning.
Reliable CCNP Collaboration 300-815 Dumps PDF Jan 25, 2022 Recently Updated Questions: https://braindumps2go.dumpexam.com/300-815-valid-torrent.html
